|
Post by themostextreme on Apr 22, 2013 9:46:26 GMT 8
Hi, would like to check - is it true that when rev the rpm up to 4,000rpm/5,000rpm on 2nd/3rd/4th gear, the temp gauge will move up to 3/4 range? Because under normal condition, the temp is one tick below of 1/2-way mark. Can any1 advise. tks!!!
|
|
|
Post by themostextreme on Apr 22, 2013 9:49:20 GMT 8
FYI, i've changed the water pump, all the water hose PLUS the thermostat and the problem still persists. Some say it's due to the materials of the engine block which is made of aluminium alloy can thus normal; instead of the traditional cast iron - which oso explain why such behaviour is not/seldom notice in V1. Can anybody verify??? tks!!!
|
|
|
Post by james15 on Apr 22, 2013 22:52:12 GMT 8
normal should be from first tick 3.5 tick. the temp should not br moving . stable there. i just change my radirator diy. leaking below.check if your fan in working at the right speed. the themostat cannot be remove because once you pull all the ways to top speed the temp. were also go up.many people like to remove it.this is because the water keep rotating until boilding without cooling. function of it is to cool the water and send back to the engine and the engine water inside were send back to the radirator for cooling/ had try on ns highway and also track before
|
|
|
Post by themostextreme on Apr 23, 2013 21:34:23 GMT 8
Sry bro, Errr... catch-no-ball. OK 2 PM me yr hp. I'll call u.........tks!
|
|