|
Post by tommythk on Nov 4, 2009 8:52:30 GMT 8
Hi bro & sis, I met an accident at Jurong yesterday night and need to go IDAC (Taman Jurong) to report today. Any recommend workshop for car repair as after report will go directly for car repair (is it the correct prosedure?)? damage on my car:- - Driver side front tyre puncture (already replace w spare after accident) - Driver side Headlamp broken - Water reservoir broken (all water came out after accident) - Driver side fender crash - Front Bumper crash - etc Mine is cerato v1 HB (light blue), OPC, insurance company: NTUC Income If you have one with good workmanship pls give me their contact and address via sms (if possible) at 9.1.9.0.2.2.1.9. Many thanks in advance~!
|
|
|
Post by tommythk on Oct 29, 2009 13:52:19 GMT 8
above mentioned is the reason y so many ppl signal last minute drove so long rarely see ppl give way when saw ur signal. But whenever there is a kind soul who give way to me, i will raise my palm to show appreciation. ppls may felt more comfortable.
|
|
|
Post by tommythk on Oct 20, 2009 17:24:34 GMT 8
It is 16" and 24" I just change few days back. By the way, anyone wants to buy my car stuff? Bro, what stuff r u selling?
|
|
|
Post by tommythk on Oct 16, 2009 16:24:57 GMT 8
you can also consider my spare turbo kit Pick up become "NO HORSE RUN" (hokkien)~!
|
|
|
Post by tommythk on Sept 21, 2009 10:46:03 GMT 8
Hmmm... tot S15 is 5 x PCDs? Tried to google cerato V1 spec but due to forte appearance, all like archieved liao. our user manual spec also didn't mention about that.
|
|
|
Post by tommythk on Sept 21, 2009 9:52:07 GMT 8
Bros, today is Public Holiday in lieu, So OPC got in lieu to today? I'm driving opc, should i display coupon today if i drive? If no need, may go to loitering ard ubi area today~!
|
|
|
Post by tommythk on Sept 20, 2009 22:22:18 GMT 8
Bros, OT a bit, Anyone know what is cerato V1 stock rotor size for front n rear? if change rotor to other car make brand stock rotor and caliper, will it fits? Or what is other car make stock rotor suite to cerato V1? thank you~!
|
|
|
Post by tommythk on Sept 19, 2009 18:24:18 GMT 8
Selamat Hari Raya to all Muslim bros & Sis~!
|
|
|
Post by tommythk on Sept 14, 2009 20:01:42 GMT 8
Went to JB on Sunday. when reach Malaysia custom coming back the time, saw officer there checking those Malays driving singapore car with fully loaded of "harvest" as they wanna check whether got overbought "minyak masak" or "tepong" and bring over to sg or not. If yes, summon will be issued. A pre-alert for all Malays SKC member who go JB beli-belah for HariRaya. cheer!
|
|
|
Post by tommythk on Sept 7, 2009 11:10:19 GMT 8
Hi Guys, Read some article few years ago about petrol station pump nozzles. When the nozzle pump cut off the time, the fuel inside the nozzle are actually rolling backward instead of stopping at where they are. when you try to squeeze more petrol after the cut off, the fuel that u squeeze into your tank are not as accurate as the fuel before pump cut off.
There are 2 myths here:- - The hose that connect to the nozzle are not as simple as we think. it actually consist another smaller hose inside the hose which allow the fuel rolling backward when fuel pump cut off automatically or by consumer(maybe for safety purpose? or conning purpose?! lolz). - The fuel counter are not as accurate as what we pump. 1ltr petrol counted by fuel counter are actually supply 0.95ltr fuel to your tank. so when you pump 50 ltr actually u only get 47.5ltr in ur tank.
So for bros and sis who actually able to pump more than their car tank spec, this may be a doubt for you to the fuel counter and hose myth of the petrol station you went for.
BTW, i'm driving HB V1 AUTO and FC is ard 9~10km/l.
Cheer~!
|
|
|
Post by tommythk on Sept 7, 2009 9:16:18 GMT 8
Mustafa selling Cr Lf Brand? Will go down and check it out~! Thanks Bro~!
|
|
|
Post by tommythk on Sept 5, 2009 14:01:42 GMT 8
Thanks all bros feedbacks~! Sounds like not so friendly to LTA and is the matter of time for them to take some necessary action once reach certain level of ppl installed n complaints.
I believe LED also one of the example especially those headlight with LED lining light. Just my point of view to share.
BTW, is anyone know where still got those brand like car life curtain selling n how much? thks
|
|
|
Post by tommythk on Sept 3, 2009 16:59:20 GMT 8
Hi All, I would like to check with any bro sis here that is car curtain LTA friendly? Thinking of install it on my cerato but not sure is it kinda offence to the LTA rule?
|
|
|
Post by tommythk on Sept 2, 2009 10:22:16 GMT 8
|
|
|
Post by tommythk on Sept 1, 2009 15:21:03 GMT 8
Bro LMF, I'm still monitoring as just done it 2 weeks ago.
Bro TeaNazar, I think when air cond off means compressor stop working, air circulation mode off mean u r letting the air from the outside blow to cabin and the air should take in from under bonnet.
Any expert can advise?
|
|
|
Post by tommythk on Sept 1, 2009 8:15:39 GMT 8
I believe is the compressor need more work load to perform ba. Just my guess... In the end, FC might increase...
|
|
|
Post by tommythk on Aug 31, 2009 22:10:03 GMT 8
Hi, my cerato HB also encounter same smelly issue. I went for air cond servicing, that mechanic told me air cond filter (below dashboard and below bonnet) very dirty. During servicing the time, he also advise me that our cerato got cold and hot air mixture to achieve our setting temperature (not sure how true it is). as he suggest too, to cut off the hot air tube and remain cold air function will get better cold air. Since i always feel air cond not cold enough in the car, i allow him to cut off the hot air tube and now my air cond got no more smell (filtration issue i think) and dam cold air cond cuz the coldness/temp cannot be adjust liao~! At the end, my objective met. lolz
|
|
|
Post by tommythk on Aug 27, 2009 8:36:49 GMT 8
Hi All Bro & Sis, Anyone who using 17" on their cerato V1 currently (or previously?) could advise me what is the off set of the rims u used?
Many thanks~!
|
|
|
Post by tommythk on Aug 26, 2009 18:24:41 GMT 8
Hi Saniboy, What is the off set for your 17" rims? Or you know what is the common off set for cerato to fit 17"? thank you~
|
|
|
Post by tommythk on Aug 21, 2009 11:31:05 GMT 8
Hi I'm new here. Not sure how all the calculation in details but correct me if i'm wrong. There are 3 criteria about wheels (aftermarket rims and tyre compare to stock):- Diameter (rim + tyre), weight (rim + tyre) and width (total surface on the road) Whichever of the above criteria increase in figure, the burden of car will increase.
note: assumed that the car on same weight or load, power (BHP and torque), driver's foot pressure on pedal, road and whether condition.
Hope this may simplify the logic. Upz~!
|
|
|
Post by tommythk on Aug 19, 2009 13:20:01 GMT 8
Hi I'm new here. I drive cerato HB 06 also found this sound when turning at Malaysia new Custom route. It sounds like came from the e power steering when there is a hard corner. Even your car in stop position, turn your steering to the end of very left or right will found the same sound too.
|
|
|
Post by tommythk on Aug 17, 2009 13:11:48 GMT 8
Hi All, New to this forum. =) Tommy / light blue / Auto HB / Jun06
|
|