|
Post by misterbear on Jul 24, 2013 11:35:49 GMT 8
Hello Bros,
Recently went to Synergy to change timing belt set. After everything was done, Mech told me IACV was cracked. Should go Ming Ghee get spare. Must have been the e-diot from another WS who caused it while cleaning throttle body. %$^$%^$#$!!!
Anyway, I got the part online (Hyundai 35150-02600). Just wondering if the bolts that hold it down need to be torqued or would any ratchet spanner suffice? Limpeh dun have toque wrench... (there are 2 bolts holding it to the throttle body)
Anything I need to be careful of?
Your advice all greatly appreciated!
|
|
|
Post by Gresini on Jul 24, 2013 12:59:08 GMT 8
Mine cracked for years. Now still crack. See how long it stay cracked. Hahaha
|
|
|
Post by misterbear on Jul 24, 2013 13:48:31 GMT 8
Gres bro, i used cable tie to tighten the current cracked one. It seems to work. Maybe you could try too! Thank you SMRT for idea
|
|
|
Post by Gresini on Jul 24, 2013 22:46:37 GMT 8
Already cracked 2yrs ago when I got the car. Spoil will update here, if this thread still exist.
|
|
|
Post by misterbear on Jul 25, 2013 13:38:15 GMT 8
HeHe. Think the thread should still be around ba
|
|
|
Post by misterbear on Jul 25, 2013 13:47:32 GMT 8
Did the change last night... here are some pics... in the end my tools not enough... the bolt of the right hand side is very flush to the IACV's side...ratchet and bit could not fit. had to use an adjustable wrench to un-tighten it before using a big head screwdriver to unscrew. On occasion the revs seem to kee seow, but I think it's coz i didn't reset the ECU. Need to wait for it to adapt to this new "OK" IACV. Can see my throttle plate full of carbon... jialat man. LOL
|
|
|
Post by Gresini on Jul 25, 2013 22:47:31 GMT 8
$50 bucks? comes with new gaskets? Suggest allen bolts as the outside one need open end or screwdriver which I dont like.
|
|
|
Post by misterbear on Jul 29, 2013 11:15:45 GMT 8
$50 bucks? :Dcomes with new gaskets? Suggest allen bolts as the outside one need open end or screwdriver which I dont like. Gres, it's a $30 China Part Supposed to be reliable... we'll see. lol Where do you get your allen bolts from? This screw quite long
|
|
|
Post by Gresini on Jul 29, 2013 20:51:41 GMT 8
$50 bucks? :Dcomes with new gaskets? Suggest allen bolts as the outside one need open end or screwdriver which I dont like. Gres, it's a $30 China Part Supposed to be reliable... we'll see. lol Where do you get your allen bolts from? This screw quite long from my toolbox... hee
|
|
|
Post by misterbear on Jul 30, 2013 11:42:29 GMT 8
Gres, it's a $30 China Part Supposed to be reliable... we'll see. lol Where do you get your allen bolts from? This screw quite long from my toolbox... hee LOL!
|
|
|
Post by MK1 on Jul 30, 2013 13:14:03 GMT 8
go steal from his toolbox... haha~~~
|
|