|
Post by yanuk on Aug 5, 2012 19:16:28 GMT 8
As mentioned. Anyone knows where to buy for v2? Need to change plated liao
|
|
|
Post by petertham on Aug 5, 2012 20:23:04 GMT 8
hi bro if you don't go check i suggest do not get disc plate with hole. You can actually change normal disc plate and get it slotted. I did mine in jb interested pm me.
|
|
|
Post by dllatimer on Aug 5, 2012 23:03:30 GMT 8
Best is to fit those aftermarket slotted then to use oem and labour slot.
There are also various material use.
If we can find the correct rotor size and thickness of our cerato, this will be a good help.
Ebay and amazon got a few, US spectra may be 5 holes so we need to find a 4 x 114.3 and direct fit (correct rotor size) so we need not do any modification to our brake system.
If you need those OEM rotor and labour slotted, Benjamin have them.
|
|
|
Post by aaur4man on Aug 6, 2012 9:28:22 GMT 8
pre fab is better than custom for brake disc
|
|
|
Post by dllatimer on Aug 6, 2012 10:31:56 GMT 8
Yes, agree.
|
|
|
Post by yanuk on Aug 6, 2012 19:27:49 GMT 8
Yah was looking for pre fab for convenience. Anyone got any idea how to find one? What is the spec / size they use to define rotors? I believe pcd is one of it?
|
|
|
Post by vaped on Oct 9, 2012 21:22:21 GMT 8
|
|
|
Post by vaped on Oct 10, 2012 11:38:05 GMT 8
searched thru the forums and somebody mentioned the v2 front brake discs diameter is 286mm? but most websites i searched it says 275mm. would it fit? much thanks.
|
|
|
Post by dllatimer on Oct 10, 2012 13:36:19 GMT 8
Go and take out rim and measure rotor lor....
The above set looks cheap. But i think the killer is the shipping.
Moreover, some of the oversea spectra PCD is 5 holes some is even PCD 4 x 100.
|
|