|
Post by lewis3690 on Oct 14, 2011 14:26:52 GMT 8
Hi!
Anyone tried the a/m on 1.6M? I can't seem to find the coolant tubes leading to the throttle. Thanks!
|
|
|
Post by Lao Beng on Oct 15, 2011 0:25:47 GMT 8
most of us had done the coolant by pass.
|
|
|
Post by Lao Beng on Oct 15, 2011 0:26:26 GMT 8
look care fully there is 2 tube at the throttle body.
|
|
|
Post by cyberalex on Oct 15, 2011 10:06:49 GMT 8
Bros...just curious..the coolant valve supposed to close the cold start valve when engine has warmed up...if by pass this, what benefits does it do?
|
|
|
Post by lewis3690 on Oct 15, 2011 22:48:42 GMT 8
look care fully there is 2 tube at the throttle body. Cool! Is the performance enhanced after the bypass? Means need to remove the air intake tube then can access the coolant tubes? Cheers!
|
|
|
Post by Lao Beng on Oct 18, 2011 10:32:49 GMT 8
Guys don't get it wrong. After by pass can get 10 BHP. ha ha ha ok the coolant from radiator to thorttle is warm and which mean the air pass through the thorttle from the air duck will be warm too.
This mod is to minz the warm air effi. and give a better pick up.
|
|
|
Post by roger06 on Oct 18, 2011 11:42:48 GMT 8
Guys don't get it wrong. After by pass can get 10 BHP. ha ha ha ok the coolant from radiator to thorttle is warm and which mean the air pass through the thorttle from the air duck will be warm too. This mod is to minz the warm air effi. and give a better pick up. sounds good! when i got my ride can help me diy ?
|
|
|
Post by lewis3690 on Oct 18, 2011 16:25:20 GMT 8
Hi Lao Beng,
Are the coolant tubes the ones with the clip? I look at the TB and the intake tube towards it. At the bottom of the TB, there is a coolant tube connected in a tight U shape. On the intake tube, there is also a coolant tube that connects to the top of the main engine block.
Can kindly advise which are the coolant tubes to swap? Thanks!!!
|
|
|
Post by cyberalex on Oct 18, 2011 21:42:12 GMT 8
Guys don't get it wrong. After by pass can get 10 BHP. ha ha ha ok the coolant from radiator to thorttle is warm and which mean the air pass through the thorttle from the air duck will be warm too. This mod is to minz the warm air effi. and give a better pick up. Does the by pass affect the cold start?
|
|
|
Post by Lao Beng on Oct 20, 2011 22:16:40 GMT 8
by pass does not affect cold start. Tomorrow nite have a meet up and I will be there late after my gym, I will what to do.
|
|
|
Post by Lao Beng on Oct 20, 2011 22:17:46 GMT 8
I will advice you but need you come for the mu tomorrow nite. in the message is hard to explain. Hi Lao Beng, Are the coolant tubes the ones with the clip? I look at the TB and the intake tube towards it. At the bottom of the TB, there is a coolant tube connected in a tight U shape. On the intake tube, there is also a coolant tube that connects to the top of the main engine block. Can kindly advise which are the coolant tubes to swap? Thanks!!!
|
|
|
Post by Lao Beng on Oct 21, 2011 9:53:13 GMT 8
ok bros, I might un-able to make it to nite MU due to last mins meeting for one up coming event to take.
|
|
|
Post by Lao Beng on Oct 21, 2011 10:07:40 GMT 8
As my last post I un-able to make I will PM you nite2nite number he also can advice you. Hi Lao Beng, Are the coolant tubes the ones with the clip? I look at the TB and the intake tube towards it. At the bottom of the TB, there is a coolant tube connected in a tight U shape. On the intake tube, there is also a coolant tube that connects to the top of the main engine block. Can kindly advise which are the coolant tubes to swap? Thanks!!!
|
|