|
Post by yakuza2508 on Oct 12, 2011 15:58:43 GMT 8
Hi All Cerato Owners,
I just bought my 07 Cerato ver2. Looking for some parts but sad to say most car shop does not supply to Kia. Anyone can advice me on the followings:
1) where to buy kia cerato ver2 compatible lowering spring?
2) kia cerato ver2 suitable for simota air intake?
3) where to get the front grill for cerato ver2?
4) anyone know of any workshop which are specialized in Kia Cerato?
Thanks in advnace.
Regards, Alex
|
|
|
Post by dllatimer on Oct 12, 2011 16:23:49 GMT 8
1) where to buy kia cerato ver2 compatible lowering spring? AT Performance/Jeep Chee - Apex Lowering Spring
2) kia cerato ver2 suitable for simota air intake? yes, need to do up adaptor. Better response for Manual ride. Not recommended for Auto.
3) where to get the front grill for cerato ver2? Vim Auto at defu lane
4) anyone know of any workshop which are specialized in Kia Cerato? Got 1 specialized one but I recommend not to go there...
|
|
|
Post by yakuza2508 on Oct 12, 2011 16:35:44 GMT 8
hey dude.. u are kinda my savor lor.. i was quite demoralised previously when i call over 10 workshops and they doesnt have lowering spring for cerato. lol
|
|
|
Post by dllatimer on Oct 12, 2011 17:02:10 GMT 8
|
|
|
Post by yakuza2508 on Oct 12, 2011 17:23:35 GMT 8
thanks for your kind help!!
|
|
|
Post by yakuza2508 on Oct 13, 2011 11:58:20 GMT 8
Sorry ar.. additional to my previous query..
Does anyone what to change to enhance the pick / response of auto cerato ver 2?
|
|
|
Post by trinity on Oct 13, 2011 13:38:49 GMT 8
Sorry ar.. additional to my previous query.. Does anyone what to change to enhance the pick / response of auto cerato ver 2? what's your proposal? ;D
|
|
|
Post by yakuza2508 on Oct 14, 2011 9:55:44 GMT 8
hi dude.. i was just thinking does an open pod air in-take and voltage stablizer makes any different? looking for more comments and assistant from laojiao here... i already input a UTM Power Charger Evo8 into my auto cerato.
|
|
|
Post by trinity on Oct 14, 2011 13:49:34 GMT 8
voltage stabalizers basically wont make any difference to the performance of ur car. period. i personally havent tried out power chargers. hows urs doin so far? and how much did u get ur v1 for? PM me...
|
|
|
Post by dllatimer on Oct 14, 2011 14:09:05 GMT 8
Erm, his is kia cerato ver2
|
|
|
Post by trinity on Oct 14, 2011 14:22:12 GMT 8
Erm, his is kia cerato ver2 oops! thanks for spotting out my mistake...
|
|
|
Post by yakuza2508 on Oct 14, 2011 14:44:32 GMT 8
Hi, no worries I can reply here.. My nov 07 ver2 sunroof I bought for 39+.
|
|
|
Post by steven77 on Oct 14, 2011 20:28:57 GMT 8
sunroof? Your's a 2L cerato V2?
|
|
|
Post by yakuza2508 on Oct 15, 2011 12:21:57 GMT 8
seriously i not too sure... its stated on my log card kia cerato sunroof...n at e back of e car its stated variant 2
|
|
|
Post by LMF on Oct 17, 2011 21:46:17 GMT 8
Welcome to the Cerato family! V2 front grill can get from Mancando, dunno whether still got stock For spring can try H&R and Eibach also Your ride's mileage? get a lighter engine oil, better air filter, lower spring, after market exhaust set up, good enough liao bro
|
|
|
Post by yakuza2508 on Oct 19, 2011 14:50:15 GMT 8
hi bro,
thanks for the advices.. will try to look into that.. cerato compatable parts are kinda rare in the market through
|
|
|
Post by LMF on Oct 19, 2011 17:58:44 GMT 8
Forte and Koup much much, V1 and v2 rare rare liao
|
|
|
Post by yakuza2508 on Oct 20, 2011 12:27:22 GMT 8
ya lor.. i already did the grounding and install power charger for the electrical part.. interested to do up the following:
1) Lowering Spring 2) Strut Bar 3) E-Manager 4) Tuning
but need some time la.. lol.. pocket not so big yet
|
|
|
Post by dllatimer on Oct 20, 2011 14:39:20 GMT 8
E-manage Blue or Ultimate?
Maybe you are the first cerato to install. Before you install you need to ask if the workshop knows how to install first. Most workshop do for Jap car make.
If stock NA, i think forget it, rather got for quickflash.
|
|
|
Post by LMF on Oct 21, 2011 18:01:40 GMT 8
dun think can fully utilise e-manage, best to do QF (quick flash), consult Joey of Harmony Motor for advise and tuning
|
|
|
Post by unocvin on Oct 22, 2011 13:11:56 GMT 8
I checked before, you can get Eibach thru the local distributor: sales@eibach.com.sg, it was available in stock when I checked last year. H&R, have to order through www.benzline.com.sg/ -more affordable than the Eibach! Struts : KYB Excel G available but your mech have to source around - local distributor doesn't have them. If you are keen to experiment, Tuscani struts fits correctly except the spring perch for the rear suspension is a little different and requires a spacer of some sort. Strut bar : i'll suggest the UltraRacing undercarriage brace rather than strut tower bar as 1st step ...bigger improvement. Rear antiroll bar : UltraRacing 15mm, or get them to indent the 19mm but that means having to upgrade the end links so more expense to consider. I read standard Tuscani rear antiroll bar fits the Cerato too!
|
|
|
Post by yakuza2508 on Oct 24, 2011 22:50:07 GMT 8
sorry for the late reply.. aniway thanks to all the laojiao here for the advice.. shall meet up to treat u all to kopi soon.
|
|
|
Post by LMF on Oct 25, 2011 10:06:12 GMT 8
i shameless, i is want treat, i want kopi gao siew dai thanks
|
|
|
Post by yakuza2508 on Oct 27, 2011 12:49:21 GMT 8
lol.. no worries.. anione interested in mid-night supper and kopi session tomorrow night? Do PM mi k.. Thanks
|
|
|
Post by yakuza2508 on Oct 31, 2011 15:46:26 GMT 8
haiii just when to a local shop.. very disappointing.. asking the mechanic how increase the hp and pick up speed.. the mechanic ask me to change car.. sian ar anione mod cerato v2 before? perhaps can share?
|
|