|
Post by kimsong76 on May 12, 2011 13:47:23 GMT 8
Hi to all Bros & Sis. I am new to this forum, juz wondering anyone of you have install hyundai coupe rear anti-roll bar into Cerato V2? cause I have check our body layout is indentical. pls advise. I am thinking to get hyundai coupe 2.7 rear anti-roll bar. thanks.
|
|
|
Post by dllatimer on May 12, 2011 15:07:34 GMT 8
Just buy the Ultra Racing one will do, i very sure no one try your recommendation, so risky to use other car make parts to try out...
|
|
|
Post by aaur4man on May 12, 2011 16:07:12 GMT 8
ultra racing is cheap and proven. i think thats enough assurance.
|
|
|
Post by dinomax on May 12, 2011 16:13:30 GMT 8
Yes... no regrets... much better handling in cornering.
|
|
|
Post by dllatimer on May 12, 2011 16:30:35 GMT 8
hmmm, handling wise, i just think that stock suspension with all the bars will make a difference.....
but the price approx $110 for front strut and $250 for ARB, the money more worth to buy lowering spring....
|
|
Fιcκs
Gear THREE
Posts: 474
|
Post by Fιcκs on May 12, 2011 17:30:19 GMT 8
I think it's compatible as I read those in the USA installed Tuscani/Coupe's rear ARB. Only look for the one with a green dot marking then it'll be compatible.
|
|
|
Post by unocvin on May 12, 2011 18:06:40 GMT 8
It's correct, Tuscani rear anti-roll bar will fit our Cerato. In fact Cerato, last generation of Elantra and the 2003-2008 Tuscani/Tiburon/Coupe share some suspension components. What was discovered is that our plastic end-links may break if the 19mm rear bars are installed - you can buy aftermarket end links. BUT you will have a 2nd and bigger problem : the rear strut housing tabs that holds supports the rear bar will snap; resulting in a potentially costly repair. In a nutshell :
Ultra Racing Cerato 15mm bar = stock plastic end links Genuine Hyundai Tuscani 16mm bar (aka Yellow Dot) = stock plastic end links Genuine Hyundai Tuscani 19mm bar (aka Green Dot) = upgrade endlinks to be safe Aftermarket Tuscani/Tiburon 22mm/23mm ARB / ULTRA RACING etc = upgrade endlinks AND perhaps Tuscani rear suspension strut
As for upgrade path; generally the north american Spectra owners spend on rear anti-roll, springs, dampers, wheel&tires in that order ...
FWIW
|
|
|
Post by kimsong76 on May 12, 2011 23:57:30 GMT 8
Thanks bro. so for the upgrade end links where to get it??
|
|
|
Post by unocvin on May 13, 2011 13:10:46 GMT 8
I'll still prefer to solve the problem with the mounting tab of the strut body before going further. With a thicker rear anti roll bar, reinforced end link, the moounting tab thus become the weakest ink. And since THIS is the strut body, a failure here can be real bad.
Back to your request, this is a list of parts i researched. For Hyundai, please try Min Ghee locally; I have been too busy with work and home to continue, so if you can please carry on and share what you find, I'll be grateful.
This are Genuine Hyundai performance struts (no springs) : labeled as UltraSports for the yrs 03-08 Tiburon/Tuscani/Coupe. It is confirmed the damping rates are better (especially rebound) than the KYB alternatives and KYB can't be fitted on our Cerato. For use on our Cerato, Right strut must be used on passenger side, Left strut goes on driver side, so that the front ARB mounts correctly.
Ultra sports FL 54650-2c300 Ultra sports FR 54660-2c300 Ultra sports RL 55350-2c300 Ultra sports RR 55360-2c300
Rear Anti Roll Bar :
19mm rear sway 55511-2C000 (aka Green Dot) rubber bushing 55513-2C110 (2 required) metal end links 55530-29500 (2 required)
If you want to get a thicker RARB, try ARB or Whiteline. I confirmed that Ultra Racing can customise a 19mm or 23mm. As long as you go above 19mm, you will need aftermarket end links: Moog 90360 OR TRW 18343
You will need appropriate size rubber bushes (23mm for 23mm RARB etc). For bushes and the Moog or TRW endlinks, try energysuspensions.com ....shipping cost as much as the items, be warned!
Alright, have fun wth your research, share what you find.
|
|
|
Post by ezys on May 18, 2011 12:01:28 GMT 8
fyi.. just changed mine at TRC JB.. ultra racing arb -RM 380 plus installation.. now cornering quite shiok...
|
|
|
Post by dllatimer on May 18, 2011 14:18:28 GMT 8
Bro Ezys,
Long time no see, that is cheap cuz i ask local shop here is SGD$250 but no idea include installation or not.
So can 'kup' corner already....haha
|
|
|
Post by ezys on May 18, 2011 14:23:48 GMT 8
been bz la bro.. werk werk werk ... wife preggy... 'kup' ah.. hmm... tried ah.. max 90 (think can go more..) from sle to wlds ave 2.. but sometimes a bit scared.. hehehehe... go alignment today 1st.. en try again.. oh ya aniwaer to whoever changing arb at trc.. 1st quote is always rm420.. but i say ehhh.. i tot u say RM380 en he say ok.. haha.. look for shop owner leong.. mine include installation + warranty
|
|
|
Post by kimsong76 on May 20, 2011 13:59:39 GMT 8
thanks for the infro. so i can get the parts from ming ghee or fong tat?
|
|
|
Post by dllatimer on May 20, 2011 15:14:41 GMT 8
ming ghee or fong tat dun sell aftermarket parts
goto those shops selling ultra racing products
|
|
|
Post by reno3 on May 20, 2011 15:30:40 GMT 8
Just install Front strut bar & Lower arm bar , thinking of installing rear anti-roll bar . should i ?
|
|
|
Post by sergio262000 on May 20, 2011 15:39:42 GMT 8
Just install Front strut bar & Lower arm bar , thinking of installing rear anti-roll bar . should i ? Bro, the lower arm bar u install front and back? wat brand and wat is the damage??
|
|
|
Post by reno3 on May 20, 2011 21:04:10 GMT 8
Both Ultra Racing - Strut Bar S$140 , Front Lower Arm Bar - S$180 .
|
|
|
Post by sergio262000 on May 20, 2011 21:12:03 GMT 8
Both Ultra Racing - Strut Bar S$140 , Front Lower Arm Bar - S$180 . Bro how abt rear lower arm bar and anti roll bar... got the front strut bar liao from the ex owner
|
|
|
Post by reno3 on May 20, 2011 21:22:27 GMT 8
Both Ultra Racing - Strut Bar S$140 , Front Lower Arm Bar - S$180 . Bro how abt rear lower arm bar and anti roll bar... got the front strut bar liao from the ex owner I saw at Ultra Racing website , Cerato only have Strut bar , Front Lower Arm Bar & Rear Anti-Roll Bar .
|
|
|
Post by sergio262000 on May 20, 2011 23:28:16 GMT 8
Bro how abt rear lower arm bar and anti roll bar... got the front strut bar liao from the ex owner I saw at Ultra Racing website , Cerato only have Strut bar , Front Lower Arm Bar & Rear Anti-Roll Bar . Thanks bro, will make a check first
|
|
|
Post by sergio262000 on May 20, 2011 23:40:14 GMT 8
Hi to all Bros & Sis. I am new to this forum, juz wondering anyone of you have install hyundai coupe rear anti-roll bar into Cerato V2? cause I have check our body layout is indentical. pls advise. I am thinking to get hyundai coupe 2.7 rear anti-roll bar. thanks. Can anyone tell me the difference between Cerato Variant 1 (V1) and Variant 2 (V2)??
|
|
|
Post by BluePicanto on May 24, 2011 16:01:58 GMT 8
The main diff is the engine & some exterior body parts and dash board. The rest is almost the same.
|
|
|
Post by sergio262000 on May 24, 2011 20:38:20 GMT 8
The main diff is the engine & some exterior body parts and dash board. The rest is almost the same. So 2009 Forte EX (A/T) is variant 1 or variant 2? ?
|
|
|
Post by aaur4man on May 24, 2011 23:55:22 GMT 8
forte is new. not a variant. variant is variant because the model name stays the same.
|
|
|
Post by jemjem on May 28, 2011 14:54:49 GMT 8
Think some bros install rear strut b4
|
|