moss
Neutral Gear
Posts: 42
|
Post by moss on Mar 13, 2010 13:29:18 GMT 8
Hi all, currently in a location w/o access to my manual appreciate if anyone can advise the PCD/offset for pica tyres additional question: will airwave rims/tyres (14") fit into pica? *edit* i got a set of used rims & tyres from my friend from his airwave 195/65/r14 however when i turn full lock - the tyre grazes the area where the skirting is bolted to the car body. does that mean the tyre is too wide? i did not see the offset of the new wheel, prolly would dismantle it tomorrow to take a look any possible solutions? (im thinking remove skirting would be possible but abit ) appreciate any kind advice/help.
|
|
|
Post by No name on Mar 14, 2010 11:52:37 GMT 8
i think ur tyres are too wide .... so when full lock, will rub against the wheel arch, right?
for pica, 14" recommended size is 185/55/R14 (common) or 165/60/R14 (harder to find)
PCD is 4x100, offset not too sure
|
|
|
Post by BlackBird on Mar 15, 2010 9:54:40 GMT 8
tyre oversize. cannot fit. rims still ok. but not more than 6width in wide. 14 X 6 inch for more information, goto www.sgtyres.com to see wat r the ones u can fit
|
|
moss
Neutral Gear
Posts: 42
|
Post by moss on Mar 18, 2010 20:40:08 GMT 8
hi guys,
thanks for replies. end of the day still fix back the stock tyres & rims.
wait till tyres wear out then change....
|
|
|
Post by mj23pica on Mar 20, 2010 13:51:18 GMT 8
max is 195/45/15. nothing more than tat
|
|