|
Post by infraguy on Nov 12, 2008 16:09:13 GMT 8
I have just fabricate a Custom Aluminum Heat Shield for APEXI Open Pod on my V2. Will up-load other pic when i fixed it up Front view (Spray with silver heat resistant paint) Top view (Spray with silver heat resistant paint) Right side view (Spray with silver heat resistant paint) Current set-up front view Current set-up side view Current set-up top view Heat Shield DIY Completed Picture The front view The Side view The top view
|
|
|
Post by subzero on Nov 12, 2008 16:53:59 GMT 8
ARC induction box.. Hehehe..
|
|
|
Post by psyfool7 on Nov 12, 2008 21:00:51 GMT 8
Very cool indeed...thumbs up...if only I got access to aluminium and welding tools..The weld job nicely done...
|
|
|
Post by RCerato on Nov 12, 2008 21:07:13 GMT 8
Very nice, smooth and curvy surface.
|
|
|
Post by psyfool7 on Nov 12, 2008 21:12:36 GMT 8
Will this sit right at the corner where the batt is?..Meaning batt relocated?...
|
|
|
Post by infraguy on Nov 12, 2008 22:12:03 GMT 8
Will this sit right at the corner where the batt is?..Meaning batt relocated?... Don't need lar. V2 space is quite alot after i totally remove the drop-in box. Will post the picture once i done up.
|
|
|
Post by infraguy on Nov 12, 2008 22:14:42 GMT 8
Very cool indeed...thumbs up...if only I got access to aluminium and welding tools..The weld job nicely done... I made a sample using plastic & ask the machinery shop to fabricate it.
|
|
|
Post by infraguy on Nov 12, 2008 22:17:41 GMT 8
Very nice, smooth and curvy surface. Pai say lar. My own design. I open top abt half & below right far end for my CAI
|
|
|
Post by psyfool7 on Nov 13, 2008 8:59:29 GMT 8
Will this sit right at the corner where the batt is?..Meaning batt relocated?... Don't need lar. V2 space is quite alot after i totally remove the drop-in box. Will post the picture once i done up. OIC...I tot u follow the CVR setup..placing at the corner will be less hot as further away from extractor..but problem is need to shift batt..but tink not very difficult for shop to do...my bro done this for his Avante.. ..Maybe u want to line the interior of the box with heatshield foam?..
|
|
|
Post by psyfool7 on Nov 13, 2008 9:01:00 GMT 8
Very cool indeed...thumbs up...if only I got access to aluminium and welding tools..The weld job nicely done... I made a sample using plastic & ask the machinery shop to fabricate it. Oh..shop do for you...not bad..maybe can get contact frm u if i want to do oso..
|
|
|
Post by yanuk on Nov 13, 2008 19:54:05 GMT 8
great work!
|
|
|
Post by infraguy on Nov 13, 2008 22:13:57 GMT 8
|
|
|
Post by ceratov2m on Nov 13, 2008 22:53:35 GMT 8
Nice!
|
|