|
Post by fusukae on Mar 16, 2009 20:01:40 GMT 8
My 1st LTA inspection. Lol. My Tyre size is 195/45 R15 My Rim size is 15 x 6.5 4-100 40ET I been using these wheel specs for my pica for 2.5 years. Gives more stability. However these are not the reccomneded specs in the user manual. Will i be able to pass the inspectionwith these tyres? My ride is installed with air charger, carbon filter, brake booster, volt stabiliser, broquet fuel charger, CAI. Are these mods legal and passable? any pica veterans here has any experience to share?
|
|
|
Post by Prof.M789 on Mar 16, 2009 22:04:24 GMT 8
Base on my experience, LTA checks for emission level, engine leakage, any modification on exhaust pipe, original bulb for head lamps, tyre thread.
|
|
|
Post by mybigshow (Alexandro) on Mar 16, 2009 22:44:52 GMT 8
Yours all will passed. U do not have any illegal modding in your car based on your sentence above. Unless got tinted windows, HID, drop engine n exos modd, then will sure fail. If not, then I dun think they can fail u.
|
|
|
Post by keong957 on Mar 17, 2009 3:00:54 GMT 8
Base on my experience, LTA checks for emission level, engine leakage, any modification on exhaust pipe, original bulb for head lamps, tyre thread. tinted windows and brakes too..
|
|
|
Post by mybigshow (Alexandro) on Mar 17, 2009 9:44:18 GMT 8
Keong, meaning they will fail aftermarket brakes too?
|
|
|
Post by keong957 on Mar 17, 2009 11:43:48 GMT 8
No la.. They test your brakes. If not braking properly, meaning your brake pad finishing then they can fail you. I almost kena, the guy say ask me go and change immed after the inspection.
|
|
|
Post by mybigshow (Alexandro) on Mar 17, 2009 14:27:30 GMT 8
Oh ok, scared me sia, cos I still thought of changing to aftermarket brakes.
|
|
|
Post by fusukae on Mar 17, 2009 16:04:57 GMT 8
thx bros... how to check if your brake pads have worn off already?
|
|
|
Post by mybigshow (Alexandro) on Mar 17, 2009 16:10:09 GMT 8
What's your milege now?
|
|
|
Post by rainman321 on Mar 17, 2009 16:14:56 GMT 8
What's your milege now? Mine is 20K - 22K odd. OPC Still able to survive for inspection?
|
|
|
Post by mybigshow (Alexandro) on Mar 17, 2009 16:34:55 GMT 8
Brake pads should last around 40K - 50K, depending on your driving.
|
|
|
Post by devilcup on Mar 17, 2009 16:50:42 GMT 8
it is best to go service before inspection. i thinking to change brake pad before go inspection end of this year but since it can last longer, i reconsider
|
|
|
Post by mybigshow (Alexandro) on Mar 17, 2009 16:52:44 GMT 8
But then, better be safe than $60, 2nd one cost $30+, so better not waste money on 2nd inspection.
|
|
|
Post by tutucake on Mar 18, 2009 9:08:45 GMT 8
white led pole lights will fail anot ah?
|
|
|
Post by mars on Mar 18, 2009 9:14:19 GMT 8
hw bout red pole light?
|
|
|
Post by osmondcsl on Mar 18, 2009 18:49:44 GMT 8
Hi All, anyone know MOD of VSD-II will pass inspection??
|
|
|
Post by fusukae on Mar 18, 2009 23:45:12 GMT 8
my pica 45k liao haven change break pads yet.. dunno will fail annot lol... mb i shd service b4 inspection
Forgot to add... I also haven white led headlamp... but my mine is the cheapo type $30 per set incl install.. same spec as stock 12V 60/55W... but dunno will fail or not... my fren say as long they see white light cfm fail.. is it true?
|
|
|
Post by VIP White on Mar 18, 2009 23:52:02 GMT 8
ur headlight test will fail. but overall inspection will still pass. that's what happened to my pica when i went for inspection in feb 09.
|
|
|
Post by Prof.M789 on Mar 18, 2009 23:54:13 GMT 8
bro, wat brand u using for the bulb and where u purchase?
|
|
|
Post by Prof.M789 on Mar 19, 2009 0:05:33 GMT 8
I suggest if possible you go this place for the inspection as they are much more lenient -
STA Inspection Pte Ltd (Ayer Rajah) 2E Ayer Rajah Crescent Singapore 139958 Tel: 6476 0988
Also, i went inspection with white bulbs but pass as these are LTA approved - Brand: Philips (Power2Night) Model: 12V 55W Cost: S$55 bought at Stamford Tyres
|
|
|
Post by rallicurl on Mar 19, 2009 9:23:57 GMT 8
white light will not straight away fail your inspection, only 5K white light and above will kena... my pole light is blue colour leh... hope to pass on my next inspection...
|
|
|
Post by mybigshow (Alexandro) on Mar 19, 2009 18:28:20 GMT 8
|
|
|
Post by mybigshow (Alexandro) on Mar 19, 2009 18:29:41 GMT 8
Hi All, anyone know MOD of VSD-II will pass inspection?? Voltage Stabilizer will pass inspection, dun worry.
|
|
|
Post by Full Metal Alchemist on Mar 19, 2009 19:10:34 GMT 8
my headlight and reverse light both fail..but overall they still pass me.. ;D
|
|
|
Post by mybigshow (Alexandro) on Mar 19, 2009 19:12:43 GMT 8
Reverse light? Why they fail reverse light?
|
|