|
Post by nite2nite on Jan 15, 2011 13:26:35 GMT 8
Other than sharing my creative DIY and cheap mods...
I will be providing a service to those who unable to DIY and want me to help them with it.
Just need to SMS or call me at 8188 8297 to arrange.
Very Affordable Labour charges... can ask ard... range onli from S$5 to S$10 for labour... Materials wise, depends on wat you want to do....
If can dropby my place and at my convenience, then no additional charges.. if I got to make a trip to your place to do On-Site, then I have to charge petrol fees liao... lol
Services as follows: (Some are FREE if done together cos it is too simple a DIY to charge you money for it... lol)
1. Throttle Cable Tightening for 1.6L (Auto or Manual) 1a. Throttle Position Fine Tuning for 2.0L (Auto or Manual)
2. Brake Safety Switch Adjustment for Auto - to make it easier to start engine without having the problem of Brake Pedal Hardening.
3. Coolant Bypass 3a. Bypass for Throttle Body - To reduce Intake Air Temp 3b. Bypass for Heater - To improve on Air-Con efficiency.. (Beware, might be too cold for some.. lol)
4. Mini-Pod Modification
5. Simple Grounding for Auto - Make auto more smooth but no real performance gain.
6. RAM-Air Intake Scoop Modification
7. Cooling System Modification for those interested in Water-Cooled Air Intake System
8. Fuse & other Electronic Modification - Brake Lights Modification - Full Brake Lights system
9. Maintenance and Cleaning - Throttle Body & Manifold
10. Installation of Oil Catch Tank
-- I can also work on your suggestions and request to come up with creative and innovative method to achieve your ideas with min. cost & value for money.
Simple give me an SMS or call at 8188 8297
|
|
numo
Neutral Gear
Posts: 40
|
Post by numo on Jan 15, 2011 18:37:26 GMT 8
Ups bro! Item 7 sounds interesting... Using our existing windscreen water or need to install tank?
|
|
|
Post by loanshark on Jan 15, 2011 23:20:56 GMT 8
great job! sometimes, the simplest job can achieve the best effect on the car. shall slowly review your products!
no offence, but aint it a bit contradicting if the moderator is offering some services that involved money? would expect such services more from an advertiser than a moderator.
just wondering only. if the admin is fine, i am fine. just thought this is something new i have never seen in a forum.
|
|
|
Post by Lao Beng on Jan 16, 2011 0:26:23 GMT 8
great job! sometimes, the simplest job can achieve the best effect on the car. shall slowly review your products! no offence, but aint it a bit contradicting if the moderator is offering some services that involved money? would expect such services more from an advertiser than a moderator. just wondering only. if the admin is fine, i am fine. just thought this is something new i have never seen in a forum. Pay him labour fee is fair bro, and it make cent let say I in the east and you at the west now I ask you to come down will you come down think think. Number 2 you ask a person to do this do do that is it fair for him if other ppl will just say you do it your self. So labour fee for him as to cover some petorl as make he all the way to meet up with you guys or come down to your place to do thing and make cent. Why don't he stay at home watching TV enjoy live rite. Bro as what I say don't be too protective this is what I share to you thanks.
|
|
|
Post by nite2nite on Jan 16, 2011 10:10:22 GMT 8
Ups bro! Item 7 sounds interesting... Using our existing windscreen water or need to install tank? Using our existing windscreen water.
|
|
|
Post by nite2nite on Jan 16, 2011 10:18:18 GMT 8
I am just providing an alternative solution for those who dont want to get their hand dirty.... the S$5 or S$10 is a small token fee which amount to a few drinks or one meal.... which normally many of those I help during DIY offer me anyway...
Instead of having to owe me the drink or meal, simply I provide an alternative...
Anyway, if Admin highlight any issues to me... I will follow the instructions accordingly.
Thanks for your feedback.
|
|
|
Post by ceratopia on Jan 16, 2011 19:29:27 GMT 8
2. Brake Safety Switch Adjustment for Auto - to make it easier to start engine without having the problem of Brake Pedal Hardening. Glenn, about item 2, can let me know what is this switch for? Has this got to do with pressing the engine start button to start engine, the display says " Depress pedal to start engine"
|
|
|
Post by ceratopia on Jan 16, 2011 19:41:11 GMT 8
Glenn has been giving out lots of tips which I believe most of us wouldn't have known or tried. He is sharing his tips for the benefit of all Koup drivers.
All will agree that no one has ever been coerce into carrying out the mods.
These can all be done by DIY and of course he has been kind enough to guide us.
However there are those who prefer Glenn "to DIY" for them.....hence the nominal fee.
|
|
|
Post by nite2nite on Jan 16, 2011 21:51:33 GMT 8
2. Brake Safety Switch Adjustment for Auto - to make it easier to start engine without having the problem of Brake Pedal Hardening. Glenn, about item 2, can let me know what is this switch for? Has this got to do with pressing the engine start button to start engine, the display says " Depress pedal to start engine" For auto, there is 2 safety devices, one is the transmission (must be in Neutral or Parking, in order to start engine), 2nd is the brake pedal must be depress before can use the push start to start the engine. -- Some of the owners have this problem of unable to depress the brake enough to start the engine, usually becos the brake pedal can harden over a few stepping when the engine is switch off.... thus to ensure this dont happen... the safety switch at the brake pedal can be fine-tuned to light tap to be released, thus can start engine without having to depress too much and face the hardening issue. -- Some simply trust one safety device at the transmission and ask me to make the safety device of the brake pedal to be permanently switch off.. thus they can start engine without having to step on the brakes.
|
|
|
Post by nite2nite on Jan 16, 2011 21:52:36 GMT 8
By the way, handbrake level adjustment and fine-tuning also available.
|
|
gt8
Neutral Gear
Posts: 5
|
Post by gt8 on Jan 17, 2011 0:03:28 GMT 8
interested in adjusting my handbrake, when convenient? the token fee is reasonable, will pay u when we meet.
|
|
|
Post by nite2nite on Jan 17, 2011 15:39:13 GMT 8
interested in adjusting my handbrake, when convenient? the token fee is reasonable, will pay u when we meet. If weekday, got to sms me at 8188 8297 to arrrange. If weekend, I usually at Yishun.
|
|
|
Post by spyder8850 on Jan 21, 2011 7:53:18 GMT 8
Bro, do u do installation of stiffeners? Does it involve in removing the rims?
|
|
|
Post by Lao Beng on Jan 21, 2011 8:45:17 GMT 8
Bro, do u do installation of stiffeners? Does it involve in removing the rims? bro, give him a call 8188 8297
|
|
|
Post by spyder8850 on Jan 21, 2011 9:17:17 GMT 8
Thnx bro lao beng
|
|
|
Post by nite2nite on Jan 21, 2011 21:27:56 GMT 8
Install stiffeners dont have to take out rims.
|
|
|
Post by jaysonhu on Aug 12, 2011 3:28:00 GMT 8
will look for u for the DIY services soon ^^
|
|
|
Post by khazampc on Mar 2, 2014 23:43:29 GMT 8
Interested in 2,3, and 6. Is your service still available?
|
|
|
Post by corgel on Mar 3, 2014 15:04:23 GMT 8
SMS him at his number to book a date.
|
|