|
Post by dubdew on Jun 6, 2008 0:00:10 GMT 8
Hi All V2 owners, anyone with v-lips installed to your V2, can post pics?... Any bodykit lobangs? Hmmm..and any drivers with 16/ 17 wheels but w/o kits...look nice anot..?
|
|
|
Post by BluePicanto on Jun 6, 2008 9:07:26 GMT 8
I think u can check it out @ the showroom session. There got lots of members with their chio chio ride pictures uploaded.
|
|
|
Post by Keenguy aka Blackwidow III on Jun 8, 2008 22:52:23 GMT 8
Hi All V2 owners, anyone with v-lips installed to your V2, can post pics?... Any bodykit lobangs? Hmmm..and any drivers with 16/ 17 wheels but w/o kits...look nice anot..? With/without BK, any rims will still bring beauty to the car... adding BK will only add more beauty on it... its not a must to have both, any of it will still makes a car looks nice...
|
|
|
Post by haroldz123 on Jun 17, 2008 23:15:17 GMT 8
this look nice. wot do u call this part? front lip diffuser? link:http://www.incustune.com/ though this in ceed but do-able i think...
|
|
|
Post by dubdew on Jun 18, 2008 0:51:46 GMT 8
anyone got lips lobang?
|
|
|
Post by ceratov2m on Jun 18, 2008 5:38:30 GMT 8
Cn our rides be installed wif the Subaru V-Lip?Pro-One Motorsports in JB do sell them,price-wise better then SGP!
|
|
|
Post by psyfool7 on Jun 18, 2008 8:40:27 GMT 8
Cn our rides be installed wif the Subaru V-Lip?Pro-One Motorsports in JB do sell them,price-wise better then SGP! Can...I juz fixed mine...How well it fits will also depend on the lips also..For my case, the V-lip fits quite well on the Fluxion front lip.. ...Is the V-lip at ProOne PU or fibre?..If fibre, better forget it as it will break easily..If PU, then good...
|
|
|
Post by Keenguy aka Blackwidow III on Jun 18, 2008 22:31:06 GMT 8
Cn our rides be installed wif the Subaru V-Lip?Pro-One Motorsports in JB do sell them,price-wise better then SGP! Can...I juz fixed mine...How well it fits will also depend on the lips also..For my case, the V-lip fits quite well on the Fluxion front lip.. ...Is the V-lip at ProOne PU or fibre?..If fibre, better forget it as it will break easily..If PU, then good... Its original or must custom made? What's the damage like?
|
|
|
Post by psyfool7 on Jun 19, 2008 0:24:11 GMT 8
Can...I juz fixed mine...How well it fits will also depend on the lips also..For my case, the V-lip fits quite well on the Fluxion front lip.. ...Is the V-lip at ProOne PU or fibre?..If fibre, better forget it as it will break easily..If PU, then good... Its original or must custom made? What's the damage like? No need to customise..It's meant for Subaru..got the V-lip without side difussers or with side difussers....the width and contour abt the same so can fit quite well..Fabulous now having offer till end of the month at $160..normal price $200...I got at $80 second hand..
|
|
|
Post by ceratopia on Jun 19, 2008 12:45:23 GMT 8
Its original or must custom made? What's the damage like? No need to customise..It's meant for Subaru..got the V-lip without side difussers or with side difussers....the width and contour abt the same so can fit quite well..Fabulous now having offer till end of the month at $160..normal price $200...I got at $80 second hand.. Any more lobang to get the 2nd hand PU V-Lip?
|
|
|
Post by psyfool7 on Jun 19, 2008 13:55:24 GMT 8
No need to customise..It's meant for Subaru..got the V-lip without side difussers or with side difussers....the width and contour abt the same so can fit quite well..Fabulous now having offer till end of the month at $160..normal price $200...I got at $80 second hand.. Any more lobang to get the 2nd hand PU V-Lip? Muz find lor..Good place to look wld be at Subaru forum since this V-lip is for TS/ Rex...
|
|
|
Post by ceratopia on Jun 20, 2008 18:14:48 GMT 8
Any more lobang to get the 2nd hand PU V-Lip? Muz find lor..Good place to look wld be at Subaru forum since this V-lip is for TS/ Rex... Bro, u mean the V-lip going for $160 now is the same V-lip as installed on WRX? Any modifications required or just simply bolt on?
|
|
|
Post by psyfool7 on Jun 20, 2008 19:17:44 GMT 8
Muz find lor..Good place to look wld be at Subaru forum since this V-lip is for TS/ Rex... Bro, u mean the V-lip going for $160 now is the same V-lip as installed on WRX? Any modifications required or just simply bolt on? Yup...the V-lip is meant for Subaru WRX/ TS..and will fit nicely on those cars...It shd also be bolt on for those cars and shd hav mounting points.. For other cars that want to use it (including Cerato), will have to direct rivet on or use self tapping screws..For Cerato, it fits quite well..If a car is wider, the V-lip wld be short at the sides..and if narrower, the v-lip would go beyond the wheel arc..It's PU so can't modify like fibreglass lips..
|
|
|
Post by ceratopia on Jun 20, 2008 21:16:18 GMT 8
Bro, u mean the V-lip going for $160 now is the same V-lip as installed on WRX? Any modifications required or just simply bolt on? Yup...the V-lip is meant for Subaru WRX/ TS..and will fit nicely on those cars...It shd also be bolt on for those cars and shd hav mounting points.. For other cars that want to use it (including Cerato), will have to direct rivet on or use self tapping screws..For Cerato, it fits quite well..If a car is wider, the V-lip wld be short at the sides..and if narrower, the v-lip would go beyond the wheel arc..It's PU so can't modify like fibreglass lips.. Appreciate the information..... thanks for sharing. I hope to get a 2nd hand PU V-Lip.
|
|
|
Post by jemjem on Jun 21, 2008 20:15:18 GMT 8
Hi Jus some info for the bros here... Jus installed my vlip on my hatch cerato today. The subaru vlip needs to be slight cut at the end of both sides and forced to shape ard the front if one did not install BK. Only the vlip without diffuser can fit cerato without BK. The other one is way too out. For installation, terrence from Fabulous was nice and helpful. But for the workers who are doing the installation, u will have to be there to ensure they do proper installation. Initially they drilled and installed about 5 screws before knowing it will not fit properly and have to remove.. then when they decide to install again, luckily i was there.. Manage to guide them through the installation. else they would have installed the vlip too "inside" making it look weird... Overall happy with the look as it makes e ride looks slightly lower and no worries of it hitting the hump as it is PU and my ride is on lowered spring. Lastly, I also feel DIY installation is not possible as cutting, bending is needed if without BK.
|
|
|
Post by psyfool7 on Jun 21, 2008 23:30:23 GMT 8
Hi Jus some info for the bros here... Jus installed my vlip on my hatch cerato today. The subaru vlip needs to be slight cut at the end of both sides and forced to shape ard the front if one did not install BK. Only the vlip without diffuser can fit cerato without BK. The other one is way too out. For installation, terrence from Fabulous was nice and helpful. But for the workers who are doing the installation, u will have to be there to ensure they do proper installation. Initially they drilled and installed about 5 screws before knowing it will not fit properly and have to remove.. then when they decide to install again, luckily i was there.. Manage to guide them through the installation. else they would have installed the vlip too "inside" making it look weird... Overall happy with the look as it makes e ride looks slightly lower and no worries of it hitting the hump as it is PU and my ride is on lowered spring. Lastly, I also feel DIY installation is not possible as cutting, bending is needed if without BK. Post pix lah bro...
|
|
|
Post by ceratov2m on Jun 22, 2008 1:02:34 GMT 8
Cn our rides be installed wif the Subaru V-Lip?Pro-One Motorsports in JB do sell them,price-wise better then SGP! Can...I juz fixed mine...How well it fits will also depend on the lips also..For my case, the V-lip fits quite well on the Fluxion front lip.. ...Is the V-lip at ProOne PU or fibre?..If fibre, better forget it as it will break easily..If PU, then good... Thks...the V-Lip at Pro-One is PU...will cfm the price he quoted for me again when I gt my ride most prob nxt week...
|
|
|
Post by jemjem on Jun 22, 2008 1:11:53 GMT 8
Hi Jus some info for the bros here... Jus installed my vlip on my hatch cerato today. The subaru vlip needs to be slight cut at the end of both sides and forced to shape ard the front if one did not install BK. Only the vlip without diffuser can fit cerato without BK. The other one is way too out. For installation, terrence from Fabulous was nice and helpful. But for the workers who are doing the installation, u will have to be there to ensure they do proper installation. Initially they drilled and installed about 5 screws before knowing it will not fit properly and have to remove.. then when they decide to install again, luckily i was there.. Manage to guide them through the installation. else they would have installed the vlip too "inside" making it look weird... Overall happy with the look as it makes e ride looks slightly lower and no worries of it hitting the hump as it is PU and my ride is on lowered spring. Lastly, I also feel DIY installation is not possible as cutting, bending is needed if without BK. Post pix lah bro... Will do... If only the one with difusser can fit.. I did a test fit.. it looks bettter... jemjem
|
|
|
Post by Keenguy aka Blackwidow III on Jun 22, 2008 1:31:51 GMT 8
Ya, interested to see how it looks like also...
|
|
|
Post by yanuk on Jun 22, 2008 15:16:24 GMT 8
|
|
|
Post by psyfool7 on Jun 22, 2008 22:57:09 GMT 8
This is Incus kit...Malaysia got this kit rite?..but dam-n ex..I read in Avante forum..Bro, u oso in Avante forum rite?...Keke
|
|
|
Post by yanuk on Jun 23, 2008 9:32:52 GMT 8
Yeah I'm hanging out there too. But lurking inside more than posting haha. Costs rm4k inside
|
|
|
Post by dubdew on Jun 23, 2008 23:16:54 GMT 8
dude..post your vlip lei..interested.
|
|
|
Post by aStRoBOi on Jun 24, 2008 22:02:43 GMT 8
avante forum seems to b popular ar.. hehe wats d add? ani1 mind telling?
|
|